Click To Call(656) 254-3220Click To Get A Free Estimate
Sealed brick paver driveway at a home in Lithia

Paver sealing for Lithia homes

Paver Sealing in Lithia, FL

Lithia pavers by the Alafia River or down a long drive get a free sealing estimate when you call (656) 254-3220.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3220
Paver sealing

Fast, careful paver sealing in Lithia

Paver sealing is available across Lithia, from the Alafia River bottomland to the streets of FishHawk Ranch and Hawkstone. A contractor washes, re-sands and seals long drives, pool decks and walks, and the estimate comes free of charge. After you ask for a free estimate, count on a reply within 1 business day, usually much sooner.

Maybe your sprinklers draw from a well, and orange freckles now fan out across the drive. Wash, sand and a fresh coat return one even color to the surface. Call (656) 254-3220 and say how long your driveway runs, since a long Lithia drive is a bigger job than a short one.

Call (656) 254-3220

Family relaxing by a sealed paver pool deck near Lithia
Why hire local

Why hire a local paver sealing contractor in Lithia?

Lithia mixes country lots with planned neighborhoods, so people here lean on a contractor who has seen both kinds of property. To talk through your own lot, ask for a free estimate.

Free look at your lot

A contractor measures your Lithia pavers at no charge and gives you a price before any work is agreed.

A published price range

Tampa Bay companies commonly publish $1.25 to $2.50 per square foot. Long Lithia drives add up fast, so get the area measured before you compare bids.

Rust handled first

Orange stains from well sprinklers get treated during the wash, so they are not sealed in under the coat.

You stay in charge

You pick the date and the finish, and you decide whether to go ahead. A Lithia estimate carries no obligation, so you can compare it with any other bid you collect.

Get Your Free Estimate in Lithia

Tell us about your pavers in Lithia.

Call (656) 254-3220

Free, no obligation

Paver joint sand detail on a walkway near Lithia
Common problems

What paver problems show up most in Lithia?

Rust dots from well sprinklers

A paver company working in Lithia says well-water sprinklers leave orange iron stains on pavers and pool decks. University of Florida extension points out that well water across Florida is mostly rich in iron. Sealer laid over rust would lock it in, which means the stain has to be treated first. Tell the contractor where your sprinkler heads sit and where the water comes from. Rust often shows first in a fan shape beside each head, and the spots are easier to treat before they have had years to set in.

Damp air near the springs and the river

Lithia Spring Major sends an average of 35 million gallons a day into the Alafia River at a steady 72 degrees, and the river wraps around much of the park. Ground close to water holds damp air. Extension guidance says moss and algae grow on pavers where shade is heavy and the surface stays wet. A lot near the river corridor may go green sooner than one up on a rise. If your walkway stays damp into the afternoon, expect the wash to take more effort there than on the sunny drive.

Silt on the low side of the drive

The north and south prongs of the Alafia meet in Lithia, and the river floods at a moderate to high level about twice a year. That is why many homes nearby stand on stilts. Elevation here runs from under 8 feet at the springs to 105 feet south of the post office. Pavers on low ground can hold silt after high water, and silt has to be washed off before sealing. A film left under the coat would show through as dull patches, so a careful rinse on the low side is worth the time.

Joint sand lost along long drives

A long drive means a lot of joints, and joints lose sand when summer rain runs across them. The Tampa Bay wet season lasts from late May to early October. Extension guidance says lost sand lets joints widen and soil settle in. Refilling them before sealing matters more the longer the drive. Bare joints also give weeds an easy start, and weeds along a long edge are a chore to pull every summer.

Finishes that need HOA sign-off

Not every Lithia lot has an association, but FishHawk Ranch and Hawkstone do, and one local company says some HOAs need approval for color-enhancing or wet-look finishes. Florida law lets an HOA review improvements only as far as its covenants or published guidelines state or reasonably imply. Read your rules before you pick a finish, and ask for the product details in writing. A written scope from the contractor makes an approval request simpler for the board.

Neighborhoods

Is sealing pavers on a rural Lithia lot different from a FishHawk Ranch street?

Yes, mostly in scale and in water. One company working here describes Lithia as master-planned neighborhoods like FishHawk Ranch and Hawkstone beside rural acreage with long driveways. Long drives mean more square feet, and well-fed sprinklers mean iron stains. Say what sort of lot you have, country acreage or a planned street, when you ask for a free estimate.

Lithia is part of the FishHawk census place, though it is the older community of the two. Newland Communities bought 3,000 acres in the late 1990s to build FishHawk Ranch, and a different company built FishHawk Trails. Those communities have associations, so call (656) 254-3220 and ask what yours says about sealer finish. The contractor can then match the product to your rules.

The old farm economy still shows across the community. Lithia has a history in agriculture, saw mills and phosphate mining, and farms here still grow strawberries, citrus and blueberries. Mosaic runs its international phosphate division from Lithia, and many residents commute to MacDill Air Force Base. If your property has a barn, a gate or a work yard beside the pavers, ask for a free estimate and say so.

Pricing

What does paver sealing cost in Lithia?

Prices posted across the Tampa Bay region run $1.25 to $2.50 per square foot for the wash, the sand and the sealer. Lithia drives can be long, so total area sets your final number more than the rate does. Rust, silt and an old coat can all push a job around inside that range. To price your drive and deck, ask for a free estimate, and the estimate comes at no charge.

A long run from the house to the pavers can add setup time, and a pool deck next to the home adds its own area. Ask the contractor to list each area and its square feet in the quote. Call (656) 254-3220 and describe where your pavers sit on the lot. A few details up front keep the quote close to the final number.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$375 to $750
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftLarge driveway or pool deck$1,250 to $2,500
1,500 sq ftDriveway plus pool deck$1,875 to $3,750

Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Lithia
How it works

How does a paver sealing job work in Lithia?

Measure and map the job

On a Lithia lot the contractor starts by measuring, since a long drive and a pool deck together can add up to a lot of square feet. The visit also checks for sunken pavers, which are repaired first because sealer preserves any dip. The visit logs any earlier coat, because a water-based product cannot go on top of a solvent-based one. Say where your sprinklers spray, and mention any soft spots or shifted pavers you have noticed. Photos on your phone help the contractor plan the visit.

Treat rust and wash the surface

Orange stains from well-water sprinklers get treated during the wash, along with green film and river silt on low lots. Sealer should never go over stains or algae, one Tampa Bay company says, because they would show through and be sealed in. Plants beside the drive are rinsed or covered, and gates and mailboxes are kept clear of overspray. The goal is a surface that is clean enough to show its true color. A clean surface is what lets the coat bond. Rust that is left behind would sit under the sealer and stay visible for the life of the coat.

Sand goes back into the joints

Once the wash has emptied the joints, fresh sand fills them ahead of the coat. Long Lithia drives have a lot of joint length, and summer rain thins it quickly. Filled joints keep soil out and hold weeds back. The surface is swept before it dries, so no loose grains sit on top of the finish. Joints that are full and tight help the pavers act as one surface instead of many loose pieces.

Check that everything is dry

Sealer needs a dry surface. Ground near the Alafia and the springs can hold moisture, so the low end of a drive may dry last, and a shaded corner behind the house may dry after that. A careful contractor waits rather than sealing a damp edge. In the wet season that can mean a day or two of delay. In the drier months the same drive may be ready by midmorning.

Seal and set the wait time

The finish you picked goes on, and an association's rules come first where they apply. Two to five years between coats is the span local companies usually quote. A Riverview company mentions about a day before walking and two before parking. On a long drive, plan where the cars will sit. Keep pets, bikes and lawn gear off the surface until the contractor says it is safe.

Services

Complete paver services in Lithia

A Lithia job starts with measuring, since drive length drives the price. Then comes the wash, a dry-out, fresh sand in the joints and sealer last. That order keeps dirt and rust from being sealed in. Call (656) 254-3220 to ask how a long driveway is measured and scheduled.

Surfaces here run from pool decks in the planned neighborhoods to long drives on country lots. Pool decks need a finish that is safe underfoot when wet, and drives need one that handles tires. Tell the contractor what you have and ask for a free estimate, and the estimate can break each area out.

Choosing a sealer means picking water-based or solvent-based, then matte or wet look. Water-based cannot go over solvent-based, so the old coat decides first. Where an HOA reviews color, a matte or clear finish is the safer place to start. Call (656) 254-3220 and ask which fits your Lithia property.

Low lots near the river can stay damp after rain, so timing matters. Sealer needs a dry surface, and the wet season runs from late May to early October. The contractor may check the low end of your drive before picking a day, because that is where water lingers longest. For a date that suits your lot, ask for a free estimate.

Questions to ask before you hire

  • Can I see the sealer's product label before you start?
  • Do you charge extra if some pavers have sunk or shifted?
  • What should I do before you arrive, such as moving cars and patio furniture?
  • Does the quote cover the pressure wash, new joint sand and the sealer itself?
  • What do you do about the green algae that creeps over my pavers every summer?
  • How do you find out how many square feet my driveway and lanai really are?
  • How long should I wait before sealing again, and what shows it is time?
Photos

What do sealed pavers look like around Lithia?

Freshly sealed paver driveway near Lithia
Sealed paver pool deck near Lithia
Sealed paver patio behind the home near Lithia
Sealed paver walkway to a front door near Lithia
Close view of freshly sealed pavers near Lithia
Paver area with one cleaned half beside a dirty half near Lithia
Contractor cleaning pavers near Lithia
Contractor sealing or sanding pavers near Lithia
Contractor talking through a paver sealing estimate with a homeowner in Lithia
Local

Why local matters in Lithia

A contractor who works Lithia knows the area is split between planned neighborhoods and country lots. That changes the questions at the estimate, such as where the sprinkler water comes from. Someone from across the county might not ask. For a contractor who covers the Lithia side of east Hillsborough County, call (656) 254-3220.

Local knowledge also covers the water. The Alafia River floods at a moderate to high level about twice a year, according to its reference page, and low lots near it can collect silt. A contractor who knows that checks the low edge of a drive first. You can ask for a free estimate and ask how the job would be planned around your lot.

Distance is part of it too. Lithia sits about 18 miles east-southeast of Tampa, and country roads add miles. A contractor who works the area plans the day with that in mind. If you are out past the main roads, ask for a free estimate and give your address.

Local roots

How did Lithia get its name, and does it matter for my pavers?

Lithia is named for lithium found in the water of a spring around 1900. That spring, now called Lithia Spring Major, sits in the Floridan Aquifer and sends an average of 35 million gallons a day into the Alafia River. Lithia Springs Regional Park covers 160 acres with cypress swamps and hardwood hammocks. If you live near the park, call (656) 254-3220 and mention it.

James Alderman built a ford across the Alafia in 1848, where Alderman's Ford Park is today, and by the Civil War his cattle ranch ran to about 30,000 head. Alderman's Ford Regional Park, the Alafia River Corridor and the Chito Branch Reserve now hold much of the open land nearby. Close to any of these places, ask for a free estimate and name your road. The contractor can then say how the job would go on your stretch of Lithia.

Questions

Frequently Asked Questions

What is the average cost to seal pavers in Lithia, Florida?

The usual published range around Tampa Bay is $1.25 to $2.50 per square foot to clean, sand and seal. A long Lithia drive raises the total, and rust, silt or an old coat can move the rate. Have every area listed with its own square footage. A quote that splits the wash, the sand and the sealer is easy to hold up against the published range.

Is it good to seal pavers in Lithia, Florida?

Usually yes, because sealing holds joint sand in place and makes the surface easier to keep clean. Rain washes sand out of unsealed joints, one Riverview company says. The tradeoffs are upkeep, since sealer needs another coat later, and timing, since it needs a dry surface. A wet look also shows scuffs sooner than matte, which is worth weighing for a drive that sees daily tires.

How often should pavers be resealed in Lithia?

Local quotes for a repeat coat tend to sit at two to five years. Full sun, tires and sprinkler overspray shorten that. One Tampa-area company says a sunny driveway can go 3 to 4 years while a covered area may last about 10, so ask where your surfaces fall. The answer depends on how much sun and traffic each one gets.

What do professionals use to seal pavers in Lithia?

They use a water-based or a solvent-based sealer, and the old coat decides which can go on. A Tampa Bay company says water-based gives a matte look and solvent-based a wet look. Keep the product name on file for the next time the surface needs attention. Knowing what is on the surface saves guessing when the next coat is due.

Can orange rust stains from well water be cleaned off before sealing?

A paver company working in Lithia says usually yes, and it has to happen first. Sealer would lock the stain in. Most Florida well water is high in iron, so tell the contractor if your sprinklers run off a well. Aiming the spray at the lawn, away from the pavers, helps keep new stains from forming.

Does my Lithia HOA need to approve a sealer finish?

Some do, especially for color-enhancing or wet-look finishes. Florida law lets an HOA review improvements only as far as its covenants or published guidelines state or reasonably imply. Read your guidelines and keep the approval with the job paperwork. If you have no association, you can pick any finish you like.

Do contractors seal long rural driveways in Lithia, not just FishHawk Ranch homes?

Yes, long country drives are part of the work here. The size changes the quote, not the steps. Get the drive measured and ask for the total in writing. Mention how far the pavers sit from the road so the contractor can plan the setup.

How long should I stay off a newly sealed driveway in Lithia?

Expect about a day before anyone walks on it and two days before a car does, according to a Riverview company. Weather and the sealer change that. Ask your contractor for the exact wait and plan where the cars will sit. A long drive is a good reason to park out on the road for a couple of days.

Ready for a Free Estimate in Lithia?

Call (656) 254-3220 and tell us about your pavers.

Call (656) 254-3220

Free, no obligation